 |
|||||||||||
 |
|||||||||||
|
Standard Features
The machine is equipped with a Siemens 840DE Numerical Control System consisting of a free-standing console-mounted control station. This unit features a 15" TFT colour screen with a resolution of 1024 x 768 pixels (XGA) and 8 + 4 horizontal and 8 vertical membrane soft keys. Languages supported include: English, French, German, Spanish, Italian, Danish or Swedish. Please specify language requirement on machine order.
CPU 50 Processor
The 840DE incorporates the high performance SINUMERIK PCU 50 processor featuring the latest Windows XP ‘Professional’ operating system:
| • | Pentium III 1.2 GHz operating speed for faster front-end processing provides rapid navigation through the system. |
| • | 256 Mb RAM |
| • | Ability to handle 3rd party applications |
| • | Enhanced graphics and networking capability |
| • | 10 Gb Hard disk |
| • | 1 Gb User data (Part Program Storage) |
| • | USB Port, 2 Channels |
| • | Ethernet connector |
| • | Data backup / restore using Ghost 6 data backup software |
| • | Alarm history |
Standard Axis Managment Features |
|
| • | Number of axes controlled ………5 |
| • | Simultaneously controlled axes…... 4 |
| • | Velocity feed forward |
| • | Automatic Acc/Dec: bell-shape |
| • |
NC Program Block look ahead (100 blocks) |
| • |
Axis Inhibit on a per axis basis |
| • |
Axis Inversion on a per axis basis |
| • |
Dry Run Feed rate |
| • |
Powerfeed and Incremental Jog |
| • | Zero Shift |
| • |
Software Axis Feed Limits, Machine |
| • |
Software Axis Feed Limits, Programmed |
| • |
Forbidden Zone Programming |
| • |
End Point Range Checking |
| • |
Axis Error Compensation |
| • |
Backlash Compensation |
| • |
Programmable spindle orientation in one degree increments |
| • | Axis Reversal Compensation for transient reversal errors, used to overcome friction for circular crossover points. |
|
*Due to continual improvements, specifications are subject to change without notice.
|
|