Feeler - VM-32S, VM-32SA
| Technical Data |
VM-32S |
VM-32SA |
| Capacity |
|
|
| Range X |
800 mm (31.5") |
800 mm (31.5") |
| Range Y |
520 mm (20.5") |
520 mm (20.5") |
| Range Z |
505 mm (19.9") |
505 mm (19.9") |
| Spindle Nose to Table Surface |
100 - 605 mm
(3.9" -23.8") |
100 - 605 mm
(3.9" -23.8") |
| Spindle Center Line to Column Surface |
560 mm (22") |
560 mm (22") |
| Column Surface to Table Center Line |
300 - 820 mm
(11.8" - 32.3") |
300 - 820 mm
(11.8" - 32.3") |
| Worktable |
|
|
| Table size (length x width) |
950 x 520 mm
(37.4 x 20.5") |
950 x 520 mm
(37.4 x 20.5") |
| Maximum table load |
500 kg (1100 lbs) |
500 kg (1100 lbs) |
| Table tee slots |
5 as standard |
5 as standard |
| Spindle |
|
|
| Spindle Taper |
No. 40 |
No. 40 |
| Speed Range |
50 - 8000 RPM |
50 - 8000 RPM |
| MTDR |
11 Kw (15 Hp) |
11 Kw (15 Hp) |
| Continuous |
7.5 Kw (10 Hp) |
7.5 Kw (10 Hp) |
| Way Systems |
|
|
| X & Y Axis |
Linear Guide Ways |
Linear Guide Ways |
| Z Axis |
Box Ways |
Box Ways |
| Axis Performance |
|
|
| Rapid traverse rate (X & Y) |
36 m/min (1.417"/min.) |
36 m/min (1.417"/min.) |
| Rapid traverse rate (Z) |
32 m/min (1.260"/min.) |
32 m/min (1.260"/min.) |
| Positioning accuracy (X,Y & Z) |
±.008 mm (±.0003")
- JIS Standard |
±.008 mm (±.0003")
- JIS Standard |
| Repeatability (X,Y & Z) |
±.003 mm (±.00012")
- JIS Standard |
±.003 mm (±.00012")
- JIS Standard |
| Toolchanger |
|
|
| Standard storage capacity |
22 Tools |
24 Tools |
| Type |
Carousel |
Swing Arm |
| Tool to Tool time |
7.0 Secs |
1.9 Secs |
| Maximum tool weight |
8 kg (17.5 lbs) |
8 kg (17.5 lbs) |
| Maximum tool diameter / Full |
80 mm (3.14")
/ 150 mm (5.9") |
80 mm (3.14")
/ 150 mm (5.9") |
| Maximum tool length |
300 mm (11.8") |
300 mm (11.8") |
| Weight & Floor Space |
|
|
| Weight |
5800 kg
(12,760 lbs) |
5800 kg
(12,760 lbs) |
| Floor space (width x depth) |
2.8 m x 2.18 m
(9.2' x 7.2') |
2.8 m x 2.18 m
(9.2' x 7.2') |
| Maximum height |
2.8 m (9.2') |
2.8 m (9.2') |
| Control Choices |
|
|
| Fanuc 0i-MB Control |
|
|
|
